Fig No.: IPO888
MATERIALS LIST
| No. | QTY. | Name | material |
1 | 1 | Locking Wrench | ASTM A126B |
2 | 1 | Operating Nut | ASTM B62 |
3 | 2 | Hex Nut Screw | ASTM A105 |
4 | 2 | Hex Nut | ASTM A105 |
5 | 1 | Snap Ring | AISI 066 |
6 | 1 | Taget Carrier Nut | ASTM B62 |
7 | 4 | Taget | ASTM B108 |
8 | 4 | Hex Cap Nut | ASTM A105 |
9 | 2 | Window Glass | LEXAN-UM |
10 | 2 | Window Glass Gasket | PTFE |
11 | 4 | Hex Cap Screw | ASTM A105 |
12 | 4 | Hex Nut | ASTM A105 |
13 | 1 | Body | ASTM A536 |
14 | 6 | Hex Cap Screw | ASTM A105 |
15 | 6 | Hex Nut Screw | ASTM A105 |
16 | 1 | Hex Nut | ASTM A126B |
17 | 4 | Base Flange | ASTM A105 |
18 | 4 | Hex Nut | ASTM A105 |
19 | 1 | Crane Coupling | ASTM A536 |
20 | 1 | Cotter Pin | AISI 304 |
21 | 1 | Stand Pipe | ASTM A53 |
22 | 1 | Stem | AISI 1045 |
23 | 1 | Plug | AISI 304 |
24 | 1 | Cover | ASTM A126B |
25 | 1 | Cross Recessed Countersunk Head Screw | AISI 304 |
26 | 1 | Locking Nose | ASTM 307 B |
FIELD ADJUSTMENT:
- Remove the top section from the top of the Indicator Post assembly.
- Cut the required length off the bottom of the Standpipe for the Gound Line to match up with Standpipe Gound Line mark.
- Set the “OPEN” and “SHUT” targets for the apporpriate valve size.
- Reattach the Top Section to the top of the Indicator Post assembly.